Replacement Battery Retention Clip – Fits Axon TASER 7

⚠️ Fits the Axon TASER 7.

Replacement battery retention clip for the bottom of the pistol grip. This is the piece the battery pack locks into. If it cracks, wears down, or goes missing, nothing holds the battery and it drops right out of the handle.

Why I made this

There's no replacement for this piece available from the manufacturer. When it breaks, the battery won't stay in and the TASER can't be used. I designed this clip so one broken piece of plastic doesn't take the whole device out of service.

Fits

• Axon TASER 7
• Fit-tested with a TS1005 battery pack

What's different about this one

• Modeled from an original clip, then corrected: the battery catch on each side is rebuilt with crisp, square edges instead of copying the wear from a used part, so the battery snaps in and stays put
• The underside is shaped to sit flat on the end of the grip
• Printed to order in durable black ABS

Install

Mounts with the two screws from your original clip. Screws are not included.

Set the clip on the end of the grip and check that it sits flat with no rocking before you tighten the screws. Click the battery pack in and give it a light tug to confirm it's locked.

This is a plastic trim and retention part only. It contains no electronics and does not change how the device works.

Shipping

Made to order. Most orders ship within 3–5 business days. US shipping only.

If it doesn't fit

Send me a photo of the problem and I'll send a free replacement or refund you. No need to ship anything back.

Questions? Text 580-967-1107, 9–5 every day.

Please note

Aftermarket part made by Mesh3D Up. Not made by, affiliated with, or endorsed by Axon Enterprise, Inc. TASER, TASER 7, and Axon are trademarks of Axon Enterprise, Inc., used here only to describe compatibility. If your device is agency-issued or covered by an Axon warranty or service plan, check with your armorer before installing a non-Axon part.